USB TO UART CONVERTER -TTL
• CP2102 USB 2.0 to TTL Module Serial Converter.
• USB to take power, leads to the interface includes 3.3V (<40mA), 5V, GND, TX, RX, the signal pin level is 3.3V, positive logic
• The main chip CP2102, generate a virtual serial port after installing the driver
• Onboard status indicator lights transceiver, install the correct drivers status indicator lit, when the communication transceiver indicator flashes, the higher the intensity, the lower the baud rate
• Support from 300bps ~ 1Mbps baud rate between
• SiLabs CP 2102 based
|CP2102 USB Drivers||6.92MB||Download|