N S K E L E C T R O N I C S

Features

• LPC 2129 Single-chip 16/32-bit microcontrollers 256KB Flash/128KB RAM
• 4 Channel 10-bit ADC
• 7-Segment LED Display(Multiplexed x4)
• 2 CAN Ports with 2CAN TransRecivers.
• A Serial Port for ISP
• An RS232 Serial Port
• Philips flash burner For Hex Downloading through Rs232 Port
• On Board JTAG Wiggler for Debugging
• DC Power Supply Connector(12v Ac or Dc)
• Optional USB Socket for Power Supply
• LCD display 2linex16Character
• 24Cxx I2C EEPROM
• 8 LED array
• Matrix Key Pad
• 4 Intruupt Switches
• Buzzer
• Eaxample Programs for LED,ADC,CAN,LCD,UART,INT SW

LPC2129 Chip Features

• 16/32-bit ARM7TDMI-S microcontroller
• 16 kB on-chip RAM,256 kB Flash Program Memory supports upto 60 MHz frequency.
• In-System Programming (ISP) and In-Application Programming (IAP) via on-chip boot-loader software.
• On-chip Embedded-ICE-RT, Embedded Trace Macrocell debugger
• Two interconnected CAN interfaces with advanced acceptance filters.
• Four channel 10-bit A/D converter with conversion time as low as 2.44 ms.
• Multiple serial interfaces including two UARTs (16C550),
• Fast I2C (400 kbits/s) and two SPIs
• Phase-Locked Loop with settling time of 100 ms.
• Vectored Interrupt Controller with configurable priorities and vector addresses.
• Two 32-bit timers (with four capture and four compare channels), PWM unit (six outputs), Real Time
• lock and Watchdog.
• Up to forty-six 5V tolerant general purpose I/O pins.
• Up to nine edge or level sensitive external interrupt pins available.
• On-chip crystal oscillator with an operating range of 1 MHz to 30 MHz.
• Two low power modes: Idle and Power-down.
• Processor wake-up from Power-down mode via external interrupt.
• Individual enable/disable of peripheral functions for power optimization.
• CPU operating voltage range of 1.65V to 1.95V(1.8 V ±0.15 V).
• I/O power supply range of 3.0 V to 3.6 V (3.3 V ± 10 %) with 5 V tolerant I/O pads.

Package Content

• ARM 7 Development Board
• Rs232 Port Cable for ISP Programming
• Parallel Port Cable For JTAG Wiggler
• Software CD( Phuilips Downloader,Data sheets,Example Porograms,Manual, Keil3 Evalution MAX 16 kb
• Burg Connecter 20 Nos
• Adapter 12 VDC

DOWLOAD MINIARM SCHEMATIC

DOWNLOAD QUICK START MANUAL