Welcome visitor you can login or create an account.
Shopping Cart
0 item(s) - INR0.00
Your shopping cart is empty!

ARM Development Board LPC 2129

Product Code: ARM DEV-016
Availability: In Stock

Features :

    LPC 2129 Single-chip 16/32-bit microcontrollers 256KB Flash/128KB RAM.
    4 Channel 10-bit ADC.
•    7-Segment LED Display (Multiplexed x4).
    2 CAN Ports with 2 CAN Transceivers.
    A Serial Port for ISP.
    An RS232 Serial Port.
    Philips flash burner For Hex Downloading through Rs232 Port.
    On Board JTAG Wiggler for Debugging.
    DC Power Supply Connector (12v Ac or Dc).
    Optional USB Socket for Power Supply.
    LCD display 2linex16Character.
    24Cxx I2C EEPROM.
    8 LED Array.
•    4x4 Matrix Key Pad.
    4 Interrupt Switches.
    Example Programs for LED, ADC, CAN LCD, UART, and INT SW.

LPC2129 Chip Features :

    16/32-bit ARM7TDMI-S microcontroller.
    16 kB on-chip RAM,256 kB Flash Program Memory supports up to 60 MHz frequency.
    In-System Programming (ISP) and In-Application Programming (IAP) via on-chip boot-loader software.
    On-chip Embedded-ICE-RT, Embedded Trace Macrocell debugger
    Two interconnected CAN interfaces with advanced acceptance filters.
    Four channel 10-bit A/D converter with conversion time as low as 2.44 ms.
    Multiple serial interfaces including two UARTs (16C550).
    Fast I2C (400 kbits/s) and two SPIs.
    Phase-Locked Loop with settling time of 100 ms.
    Vectored Interrupt Controller with configurable priorities and vector addresses.
    Two 32-bit timers (with four capture and four compare channels), PWM unit (six outputs), Real Time.
    Lock and Watchdog.
    Up to forty-six 5V tolerant general purpose I/O pins.
    Up to nine edge or level sensitive external interrupt pins available.
    On-chip crystal oscillator with an operating range of 1 MHz to 30 MHz.
    Two low power modes: Idle and Power-down.
    Processor wake-up from Power-down mode via external interrupt.
    Individual enable/disable of peripheral functions for power optimization.
    CPU operating voltage range of 1.65V to 1.95V(1.8 V ±0.15 V).
    I/O power supply range of 3.0 V to 3.6 V (3.3 V ± 10 %) with 5 V tolerant I/O pads.


Note :

        • while testing for LCD,LED,7 SEGMENT,SWITCHES ect.you have to insert jumpers with respect to LCD,LED,                                                     7 SEGMENT,SWITCHES ect.

        • While testing for LED remove the LCD form board.


Package Content :

   2129 Board.
   serial cable.
 Software CD.

Write a review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

LPC2129 dev Board Schematic4.22MB Download
LPC2129 dev Board Manual3.27MB Download
Philips Falsh Utility2.7MB Download
MANUAL FOR 21291.49MB Download